Paxton Net2, Switch2, dan Pasar Inggris
Paxton Access is the dominant access-control manufacturer across the UK and Ireland, with Net2 and Switch2 representing its two principal product lines. Net2 is a networked, software-managed platform suited to multi-door commercial and enterprise sites; Switch2 is the standalone, simpler sibling for single-door or small-site deployments. Both platforms use the same token form factor and, critically, the same password-protected 125 kHz credential technology, which means the credential supply question is identical across both product families.
Skala besar basis terpasang Paxton — puluhan ribu situs mulai dari praktik dokter umum hingga tempat parkir bertingkat — membuat pasokan token yang kompatibel menjadi signifikan secara komersial. Fob OEM memiliki harga premium yang bertambah dengan cepat ketika sebuah situs perlu mengeluarkan lima puluh atau seratus media akses, dan tim pengadaan secara rutin mencari pemasok independen yang berkualitas. Permintaan itu berada tepat dalam jangkauan produk kami, tercakup dalam program key fob yang kompatibel untuk setiap format utama.
Rentang token Paxton mencakup beberapa nomor bagian — yang paling sering dipesan adalah fob hitam standar (bagian 695-644) dan kartu proximity yang setara — tetapi format media akses yang mendasarinya konsisten di seluruh jajaran token standar. Memesan stok yang kompatibel berdasarkan referensi nomor bagian mudah dilakukan setelah Anda memahami apa yang sebenarnya dibutuhkan format tersebut.
Bagi pemasang dan manajer fasilitas yang bertanggung jawab atas beberapa situs Paxton, ekonomi pasokan yang kompatibel jelas. Bahkan penghematan per unit yang sederhana akan bertambah secara substansial di seluruh program yang secara rutin melibatkan pergantian staf, fob yang hilang, dan penerbitan untuk karyawan baru. Pasokan independen dari produsen media akses spesialis memberikan pengalaman pendaftaran yang sama dengan stok OEM dengan harga yang lebih kompetitif, dengan manfaat tambahan dari pemasok yang berfokus secara khusus pada kualitas media akses dan jaminan kompatibilitas.
Why a Password-Protected Transponder Is Not a Plain 125 kHz Proximity Card
Standard 125 kHz read-only credentials — EM4100, HID Prox, Indala — broadcast a fixed ID on request with no authentication layer. Any compatible reader that knows the encoding simply reads and acts on that ID. A password-protected transponder operates differently: it is a bidirectional, password-authenticated LF protocol. Before the tag transmits its identifier, the reader and the tag perform a mutual authentication exchange using a shared secret embedded in the chip's protected memory pages.
The practical consequence is that a compatible crypto fob must be correctly configured — password and memory layout set to match what the Paxton controller expects — before it will be enrolled or recognised. A blank crypto transponder chip that has not been configured will simply not respond correctly to a Net2 or Switch2 reader. This is the source of frequent confusion: buyers familiar with plain prox cards assume any 125 kHz blank will substitute in, only to find the controller silently rejects credentials that haven't been prepared for the format. Our Panduan penjelasan T5577 covers the broader landscape of programmable LF blanks, but the password-protected transponder is its own distinct protocol class that T5577 does not cover.
The password-protected architecture also means this credential class sits in a different compliance category to plain prox. Sites using it get a meaningful step up in LF-layer security compared to EM4100 or standard 26-bit Wiegand cards. It is not a high-security smart-card protocol — that tier belongs to AES-encrypted HF formats — but it is substantially more robust than unprotected prox, which matters for the risk profile of the many medium-security commercial sites Paxton serves.
Understanding this distinction is also important for procurement conversations. When a facilities manager asks whether a compatible fob will 'work the same way,' the answer is yes — but only because the compatible fob has been correctly prepared at the protocol level, not simply because it shares the 125 kHz operating frequency with plain prox credentials. The preparation step is what makes our compatible crypto fob a direct functional equivalent to the Paxton OEM token.
Nomor Bagian Token dan Apa yang Mereka Beri Tahu Anda
Paxton menerbitkan taksonomi nomor bagian yang mudah. Key fob Net2 standar adalah 695-644 (finishing hitam, loop gantungan kunci standar ISO). Ada juga kartu akses (695-651 dan yang terkait) dan kartu proximity untuk jajaran pembaca Net2. Token Switch2 berbagi format media akses yang sama dan nomor bagian fob standar berlaku silang — perbedaan platform ada pada perangkat keras pengontrol, bukan pada token itu sendiri.
When procuring compatible stock, the part number gives you the physical form factor you need, but the format specification that matters for compatibility is the password-protected transponder configuration, not the moulded case reference. Our Daftar produk fob yang kompatibel dengan Paxton Net2/Switch2 kami memetakan langsung ke setara standar 695-644: dimensi yang sama, penempatan loop yang sama, kelas chip yang sama, diprogram ke konfigurasi pabrik yang benar. Pembeli dapat mereferensikan nomor bagian OEM dalam pesanan pembelian mereka untuk ketertelusuran; kami memenuhi spesifikasi tersebut.
Jika Anda tidak yakin apakah situs Anda menggunakan format token standar atau salah satu varian kartu proximity Paxton yang kurang umum, panduan identifikasi format kartu akses kami menjelaskan langkah-langkah inspeksi fisik dan, jika relevan, pemeriksaan output pembaca yang mengkonfirmasi protokol yang digunakan.
Sites that have accumulated a mix of credential generations — perhaps older Switch2 tokens alongside newer Net2 installations — will find that compatible supply simplifies reordering considerably. Rather than tracking OEM stock levels across multiple part-number variants, a single compatible fob specification covers the standard password-protected 125 kHz credential type used across the Paxton estate. The physical form factor of the 695-644 equivalent is the most commonly held, and our standard stock reflects that.
Memproduksi Token Paxton yang Kompatibel
Sebuah fob Paxton yang kompatibel starts with a genuine password-protected 125 kHz blank — not a generic LF blank, and not an EM4100 credential relabelled. The chip's authentication block and configuration pages must be written to the correct state before the fob is packaged. This is a programming step, not a duplication exercise: the output is a blank credential in the right protocol state, ready for your Net2 or Switch2 system to enrol with its own site-specific settings, just as it would enrol a factory-fresh OEM token.
Enrolment happens through the Paxton software in exactly the same way as with OEM stock. The controller assigns a token ID, sets permissions and time profiles, and writes that enrolment to its database. The compatible fob holds no site-specific data before enrolment — it simply presents itself to the reader as a valid password-protected 125 kHz credential in the expected configuration, at which point the Paxton system takes over. This is the standard model for media akses kompatibel milik perusahaan di semua produsen utama.
Kontrol kualitas pada tahap ini penting. Chip yang tidak ditulis ke konfigurasi yang benar akan ditolak secara diam-diam saat pendaftaran, yang membuang waktu di lokasi. Proses produksi kami mencakup langkah verifikasi baca-balik untuk setiap batch fob. Pembeli yang memesan untuk situs besar harus meminta jumlah sampel untuk pengujian bangku sebelum menerima pengiriman penuh — praktik standar untuk setiap bahan habis pakai kontrol akses yang penting.
Langkah verifikasi baca-balik patut mendapat perhatian khusus. Setiap fob dalam satu batch diperiksa terhadap profil referensi untuk mengkonfirmasi bahwa blok autentikasi dan halaman memori berada dalam status yang benar untuk pendaftaran Paxton Net2 dan Switch2. Ini menghilangkan risiko ketidakcocokan diam-diam mencapai situs pelanggan. Jika penerapan Anda melibatkan peluncuran skala situs — katakanlah, seratus fob untuk bangunan baru — mengkonfirmasi kualitas lot produksi sebelum penerbitan penuh adalah pendekatan profesional, dan kami secara aktif mendukung permintaan sampel untuk tujuan tersebut.
Membandingkan Token Paxton dengan Proximity 125 kHz Biasa
The table below sets out the key differences between Paxton Net2/Switch2 password-protected tokens and the plain-prox credentials used in basic 125 kHz systems. The distinction is relevant both for sourcing decisions and for understanding what compatible supply actually involves.
Situs yang saat ini mengoperasikan prox biasa dan mempertimbangkan migrasi ke Paxton — atau mengevaluasi apakah tingkatan media akses Paxton sesuai dengan persyaratan keamanan mereka — akan menemukan perbandingan ini berguna. panduan pembeli kartu akses kompatibel vs asli mencakup pertanyaan pengadaan yang lebih luas, termasuk kapan pasokan yang kompatibel mudah dan kapan diperlukan lebih banyak perhatian.
Memesan Fob Paxton yang Kompatibel dalam Jumlah Besar
Token Paxton yang kompatibel tersedia melalui rentang proximity LF 125 kHz kami dalam jumlah satuan, sepuluh-pak, dan skala situs. Stok standar mencakup faktor bentuk key fob yang setara dengan 695-644; kartu akses kompatibel Paxton tersedia berdasarkan permintaan. Waktu tunggu untuk stok standar singkat; pesanan batch besar yang disesuaikan harus dipesan dengan pemberitahuan yang sesuai.
A useful alternative for multi-site operators or access-control installers managing several Paxton estates is our crypto transponder blank fob — the unprogrammed password-protected 125 kHz token that some system integrators prefer to encode in-house using their own Paxton-connected tooling. For direct issuance without additional programming steps, the pre-configured Daftar produk fob yang kompatibel dengan Paxton Net2/Switch2 fob kompatibel Paxton yang telah dikonfigurasi sebelumnya fob token kompatibel PAC mencakup format tersebut di bawah proses pemesanan yang sama. Jika Anda juga mengelola instalasi PAC atau Stanley di samping properti Paxton, fob kami
Untuk pemasang yang menawar instalasi Paxton baru atau mengambil alih pengelolaan properti yang ada, membangun rantai pasokan fob kompatibel yang andal sejak awal mengurangi ketergantungan pada satu saluran vendor dan memberikan stabilitas harga sepanjang siklus hidup media akses. Kami secara teratur bekerja dengan pemasang kontrol akses yang mengelola properti di berbagai situs dan dapat mendukung pesanan massal, pengiriman bertahap, dan verifikasi format berdasarkan permintaan.
Security ID Systems adalah produsen dan pemasok independen media akses kontrol akses yang kompatibel dan tidak berafiliasi dengan, diotorisasi oleh, atau didukung oleh Paxton Access Limited.
Paxton Net2/Switch2 password-protected token vs plain 125 kHz proximity: key differences
| Atribut | Paxton Net2/Switch2 (Password-Protected) | Prox 125 kHz Biasa (misalnya EM4100) |
|---|---|---|
| Teknologi chip | Password-protected 125 kHz (LF crypto) | EM4100 atau LF hanya-baca serupa |
| Frekuensi operasi | 125 kHz | 125 kHz |
| Autentikasi | Pertukaran dua arah yang diautentikasi kata sandi | Tidak ada — menyiarkan ID tetap pada setiap permintaan |
| Memori | 256 bit, dipartisi dengan halaman terlindungi | 64 bit, hanya-baca setelah pemrograman |
| Diperlukan blanko yang kompatibel | Password-protected 125 kHz blank, correctly configured | Blanko apa pun yang kompatibel dengan EM4100 |
| Metode pendaftaran | Didaftarkan melalui perangkat lunak Paxton Net2/Switch2 | Disajikan ke pembaca; ID dibaca langsung |
| Tingkat keamanan | Kripto LF — sedang; lebih kuat dari prox biasa | Minimal — tidak ada autentikasi lapisan media akses |
| Kompleksitas pasokan yang kompatibel | Membutuhkan konfigurasi protokol yang benar sebelum pendaftaran | Mudah — blanko membawa ID |