VK/EU tokens

Paxton Net2 & Switch2 Tokens Explained (Password-Protected 125 kHz)

Security ID Systems ·

Paxton Net2 and Switch2 tokens use a password-protected 125 kHz transponder — a low-frequency crypto credential that requires a matching password and configuration to be recognised by the reader — not a plain prox credential that any reader will acknowledge on sight. That distinction matters when you're sourcing replacement or additional fobs: a compatible Paxton token is a password-protected 125 kHz blank programmed to the specific configuration your site's controller expects, and it will work seamlessly in the same way an OEM token does — issued, enrolled and managed through the same Net2 or Switch2 software.

Paxton Net2, Switch2 en de Britse Markt

Paxton Access is the dominant access-control manufacturer across the UK and Ireland, with Net2 and Switch2 representing its two principal product lines. Net2 is a networked, software-managed platform suited to multi-door commercial and enterprise sites; Switch2 is the standalone, simpler sibling for single-door or small-site deployments. Both platforms use the same token form factor and, critically, the same password-protected 125 kHz credential technology, which means the credential supply question is identical across both product families.

De enorme schaal van Paxton's geïnstalleerde basis — tienduizenden locaties variërend van huisartsenpraktijken tot parkeergarages met meerdere verdiepingen — maakt de levering van compatibele tokens commercieel significant. OEM-sleutelhangers dragen een premie die snel oploopt wanneer een locatie vijftig of honderd toegangsmedia moet uitgeven, en inkoopteams zoeken routinematig naar een gekwalificeerde onafhankelijke leverancier. Die vraag past precies in ons productassortiment, gedekt onder ons programma voor compatibele sleutelhangers voor elk belangrijk formaat.

Paxton's tokenassortiment omvat verschillende onderdeelnummers — de meest frequent bestelde zijn de standaard zwarte sleutelhanger (onderdeel 695-644) en de gelijkwaardige proximity cards — maar het onderliggende toegangsmediumformaat is consistent over de standaard tokenlijn. Het bestellen van compatibele voorraad op basis van onderdeelnummerreferentie is eenvoudig zodra u begrijpt wat het formaat 'onder de motorkap' daadwerkelijk vereist.

Voor installateurs en facilitair managers die verantwoordelijk zijn voor meerdere Paxton-locaties, is de economie van compatibele levering duidelijk. Zelfs bescheiden besparingen per eenheid stapelen zich aanzienlijk op binnen een programma dat routinematig personeelsverloop, verloren sleutelhangers en uitgiften aan nieuwe medewerkers omvat. Onafhankelijke levering van een gespecialiseerde fabrikant van toegangsmedia levert dezelfde inschrijvingservaring als OEM-voorraad tegen een concurrerender prijs, met het extra voordeel van een leverancier die specifiek gericht is op de kwaliteit van toegangsmedia en compatibiliteitsborging.

Why a Password-Protected Transponder Is Not a Plain 125 kHz Proximity Card

Standard 125 kHz read-only credentials — EM4100, HID Prox, Indala — broadcast a fixed ID on request with no authentication layer. Any compatible reader that knows the encoding simply reads and acts on that ID. A password-protected transponder operates differently: it is a bidirectional, password-authenticated LF protocol. Before the tag transmits its identifier, the reader and the tag perform a mutual authentication exchange using a shared secret embedded in the chip's protected memory pages.

The practical consequence is that a compatible crypto fob must be correctly configured — password and memory layout set to match what the Paxton controller expects — before it will be enrolled or recognised. A blank crypto transponder chip that has not been configured will simply not respond correctly to a Net2 or Switch2 reader. This is the source of frequent confusion: buyers familiar with plain prox cards assume any 125 kHz blank will substitute in, only to find the controller silently rejects credentials that haven't been prepared for the format. Our T5577 uitleg gids covers the broader landscape of programmable LF blanks, but the password-protected transponder is its own distinct protocol class that T5577 does not cover.

The password-protected architecture also means this credential class sits in a different compliance category to plain prox. Sites using it get a meaningful step up in LF-layer security compared to EM4100 or standard 26-bit Wiegand cards. It is not a high-security smart-card protocol — that tier belongs to AES-encrypted HF formats — but it is substantially more robust than unprotected prox, which matters for the risk profile of the many medium-security commercial sites Paxton serves.

Understanding this distinction is also important for procurement conversations. When a facilities manager asks whether a compatible fob will 'work the same way,' the answer is yes — but only because the compatible fob has been correctly prepared at the protocol level, not simply because it shares the 125 kHz operating frequency with plain prox credentials. The preparation step is what makes our compatible crypto fob a direct functional equivalent to the Paxton OEM token.

Token Onderdeelnummers en Wat Ze U Vertellen

Paxton publiceert een duidelijke taxonomie van onderdeelnummers. De standaard Net2 sleutelhanger is 695-644 (zwarte afwerking, ISO-standaard sleutelringlus). Er zijn ook toegangsmedia in kaartvorm (695-651 en gerelateerd) en proximity cards voor het Net2 lezersassortiment. Switch2 tokens delen hetzelfde toegangsmediumformaat en de standaard sleutelhanger-onderdeelnummers zijn onderling uitwisselbaar — het platformonderscheid zit in de controllerhardware, niet in de token zelf.

When procuring compatible stock, the part number gives you the physical form factor you need, but the format specification that matters for compatibility is the password-protected transponder configuration, not the moulded case reference. Our Paxton Net2/Switch2 compatibele sleutelhanger productlijst komt direct overeen met het standaard 695-644 equivalent: dezelfde afmetingen, dezelfde lusplaatsing, dezelfde chipklasse, geprogrammeerd naar de juiste fabrieksconfiguratie. Kopers kunnen het OEM-onderdeelnummer in hun inkooporder vermelden voor traceerbaarheid; wij leveren volgens die specificatie.

Als u niet zeker weet of uw locatie het standaard tokenformaat of een van Paxton's minder gangbare proximity card varianten gebruikt, dan is onze handleiding voor identificatie van toegangskaartformaten behandelt de stappen voor fysieke inspectie en, indien relevant, de lezer-outputcontrole die het gebruikte protocol bevestigt.

Sites that have accumulated a mix of credential generations — perhaps older Switch2 tokens alongside newer Net2 installations — will find that compatible supply simplifies reordering considerably. Rather than tracking OEM stock levels across multiple part-number variants, a single compatible fob specification covers the standard password-protected 125 kHz credential type used across the Paxton estate. The physical form factor of the 695-644 equivalent is the most commonly held, and our standard stock reflects that.

Een Compatibele Paxton Token Produceren

Een correct geproduceerde compatibele Paxton sleutelhanger starts with a genuine password-protected 125 kHz blank — not a generic LF blank, and not an EM4100 credential relabelled. The chip's authentication block and configuration pages must be written to the correct state before the fob is packaged. This is a programming step, not a duplication exercise: the output is a blank credential in the right protocol state, ready for your Net2 or Switch2 system to enrol with its own site-specific settings, just as it would enrol a factory-fresh OEM token.

Enrolment happens through the Paxton software in exactly the same way as with OEM stock. The controller assigns a token ID, sets permissions and time profiles, and writes that enrolment to its database. The compatible fob holds no site-specific data before enrolment — it simply presents itself to the reader as a valid password-protected 125 kHz credential in the expected configuration, at which point the Paxton system takes over. This is the standard model for bedrijfseigen compatibele toegangsmedia bij alle grote fabrikanten.

Kwaliteitscontrole in dit stadium is belangrijk. Chips die niet in de juiste configuratie zijn geschreven, worden stilzwijgend geweigerd bij inschrijving, wat tijd verspilt op locatie. Ons productieproces omvat een read-back verificatiestap voor elke sleutelhanger-batch. Kopers die voor grote locaties bestellen, moeten een monsterhoeveelheid aanvragen voor bench-testing voordat ze de volledige levering accepteren — standaardpraktijk voor elk kritiek toegangscontrole-verbruiksartikel.

De read-back verificatiestap verdient specifieke vermelding. Elke sleutelhanger in een batch wordt gecontroleerd tegen een referentieprofiel om te bevestigen dat het authenticatieblok en de geheugenpagina's in de juiste staat zijn voor Paxton Net2 en Switch2 inschrijving. Dit elimineert het risico dat stille incompatibiliteiten een klantlocatie bereiken. Als uw implementatie een grootschalige uitrol betreft — bijvoorbeeld honderd sleutelhangers voor een nieuwbouw — is het bevestigen van de kwaliteit van de productielot vóór volledige uitgifte de professionele aanpak, en wij ondersteunen actief monsterverzoeken voor dat doel.

Paxton Tokens Vergelijken met Gewone 125 kHz Proximity

The table below sets out the key differences between Paxton Net2/Switch2 password-protected tokens and the plain-prox credentials used in basic 125 kHz systems. The distinction is relevant both for sourcing decisions and for understanding what compatible supply actually involves.

Locaties die momenteel plain prox gebruiken en overwegen om naar Paxton te migreren — of evalueren of Paxton's toegangsmedium-tier voldoet aan hun beveiligingseis — zullen de vergelijking nuttig vinden. De kopersgids voor compatibele versus originele toegangskaarten behandelt de bredere inkoopvraag, inclusief wanneer compatibele levering eenvoudig is en wanneer meer zorg nodig is.

Compatibele Paxton Fobs in Bulk Bestellen

Compatibele Paxton tokens zijn verkrijgbaar via ons 125 kHz LF proximity assortiment in enkele stuks, tien stuks en op locatieschaal. Standaardvoorraad omvat de sleutelhangerformaat die gelijk is aan 695-644; Paxton-compatibele toegangsmedia in kaartvorm zijn op aanvraag verkrijgbaar. De levertijden voor standaardvoorraad zijn kort; grotere batches op maat moeten met passende kennisgeving worden besteld.

A useful alternative for multi-site operators or access-control installers managing several Paxton estates is our crypto transponder blank fob — the unprogrammed password-protected 125 kHz token that some system integrators prefer to encode in-house using their own Paxton-connected tooling. For direct issuance without additional programming steps, the pre-configured Paxton Net2/Switch2 compatibele sleutelhanger het juiste product. Als u naast een Paxton-installatie ook PAC- of Stanley-installaties beheert, dekt onze PAC compatibele token-sleutelhanger dat formaat onder hetzelfde bestelproces.

Voor installateurs die inschrijven op nieuwe Paxton-installaties of het beheer van een bestaande installatie overnemen, vermindert het vanaf het begin opzetten van een betrouwbare toeleveringsketen voor compatibele sleutelhangers de afhankelijkheid van één leverancierskanaal en zorgt het voor prijsstabiliteit gedurende de levenscyclus van de legitimatie. We werken regelmatig samen met installateurs van toegangscontrole die installaties op meerdere locaties beheren en kunnen op aanvraag ondersteuning bieden bij raamcontracten, gefaseerde leveringen en formaatverificatie.

Security ID Systems is een onafhankelijke fabrikant en leverancier van compatibele toegangscontrolemedia en is niet gelieerd aan, geautoriseerd door of onderschreven door Paxton Access Limited.

Paxton Net2/Switch2 password-protected token vs plain 125 kHz proximity: key differences

AttribuutPaxton Net2/Switch2 (Password-Protected)Gewone 125 kHz Prox (bijv. EM4100)
ChiptechnologiePassword-protected 125 kHz (LF crypto)EM4100 of vergelijkbare alleen-lezen LF
Werkfrequentie125 kHz125 kHz
AuthenticatieWachtwoord-geauthenticeerde bidirectionele uitwisselingGeen — zendt vaste ID uit op elk verzoek
Geheugen256 bits, gepartitioneerd met beveiligde pagina's64 bits, alleen-lezen na programmering
Compatibele blanco vereistPassword-protected 125 kHz blank, correctly configuredElke EM4100-compatibele blanco
InschrijvingsmethodeIngeschreven via Paxton Net2/Switch2 softwareAangeboden aan lezer; ID direct gelezen
BeveiligingsniveauLF crypto — matig; sterker dan gewone proxMinimaal — geen authenticatie op het niveau van het toegangsmedium
Complexiteit compatibele leveringVereist correcte protocolconfiguratie vóór inschrijvingEenvoudig — blanco draagt de ID

Veelgestelde vragen

Welke chip zit er in een Paxton Net2 sleutelhanger?

Paxton Net2 and Switch2 tokens use a password-protected 125 kHz transponder, a low-frequency crypto credential that operates with password authentication rather than broadcasting a fixed ID like a plain prox card. The chip runs a mutual authentication exchange with the reader before transmitting, which is why a correctly configured password-protected blank is required for compatible supply rather than a generic 125 kHz token.

Kan een Paxton-fob worden vervangen via compatibele levering?

A Paxton Net2 or Switch2 fob cannot be handled using ordinary read-write tools in the way a plain prox card can, because the transponder's password-protected memory blocks prevent straightforward read-back of the credential data via standard equipment. Compatible replacement fobs are produced as correctly configured blanks that your Paxton system enrols fresh — the same process as issuing a new OEM fob — rather than as credentials derived from an existing token.

What is the Paxton token protocol?

The Paxton token protocol is a low-frequency (125 kHz) RFID protocol. It differs from plain prox formats by including a password-based authentication layer and protected memory pages, making it a more secure LF credential. It is used by Paxton Access across its Net2 and Switch2 product lines and by a number of other European access-control manufacturers.

Zijn Net2- en Switch2-tokens uitwisselbaar?

Yes. Net2 and Switch2 tokens use the same password-protected 125 kHz credential format and the same physical form factor. The difference between the two product lines is in the controller hardware and software — Net2 is a networked, multi-door platform; Switch2 is a standalone single-door system — but both enrol and operate the same token type. A compatible fob supplied for one platform will enrol correctly on the other.

Kunt u Paxton-sleutelhangers leveren in een 10-pack of grotere hoeveelheid?

Ja. Compatibele Paxton Net2/Switch2-sleutelhangers zijn verkrijgbaar in losse eenheden, tien-packs en grotere hoeveelheden voor locaties. De standaardvoorraad omvat de sleutelhangerformaat die overeenkomt met de OEM 695-644 referentie. Voor grote bestellingen of programma's voor meerdere locaties, neem contact met ons op om de batchgrootte, levertijden en monstertests te bespreken vóór volledige implementatie.

Werken compatibele Paxton-sleutelhangers met alle Net2-lezerversies?

Compatible Paxton fobs programmed to the correct password-protected 125 kHz configuration are designed to enrol and operate across the standard Net2 and Switch2 reader range. As with any credential supply, we recommend testing a sample batch at your site before full deployment, particularly on older or non-standard reader installations, to confirm enrolment behaviour before committing to a large order.

Wat is het Paxton 695-644 onderdeelnummer?

695-644 is Paxton Access's standard black key fob for the Net2 and Switch2 product lines — the most widely ordered token form factor in the Paxton range. It uses the password-protected 125 kHz protocol and is the reference our compatible fob product maps to. Ordering compatible stock against the 695-644 part number is common practice among installers and facilities managers procuring outside the OEM channel.

Vraag een offerte aan

Kunt u uw formaat niet vinden? E-mail de specialisten.

Send the part number printed on your card or a photo of the reader. We confirm compatibility before you order — and we cover specialist and legacy formats too.