英国/EUトークン

Paxton Net2 & Switch2 Tokens Explained (Password-Protected 125 kHz)

Security ID Systems ·

Paxton Net2 and Switch2 tokens use a password-protected 125 kHz transponder — a low-frequency crypto credential that requires a matching password and configuration to be recognised by the reader — not a plain prox credential that any reader will acknowledge on sight. That distinction matters when you're sourcing replacement or additional fobs: a compatible Paxton token is a password-protected 125 kHz blank programmed to the specific configuration your site's controller expects, and it will work seamlessly in the same way an OEM token does — issued, enrolled and managed through the same Net2 or Switch2 software.

Paxton Net2、Switch2、および英国市場

Paxton Access is the dominant access-control manufacturer across the UK and Ireland, with Net2 and Switch2 representing its two principal product lines. Net2 is a networked, software-managed platform suited to multi-door commercial and enterprise sites; Switch2 is the standalone, simpler sibling for single-door or small-site deployments. Both platforms use the same token form factor and, critically, the same password-protected 125 kHz credential technology, which means the credential supply question is identical across both product families.

Paxtonの導入基盤の規模(一般診療所から多階建て駐車場まで、数万のサイトに及ぶ)は、互換性のあるトークン供給を商業的に重要なものにしています。OEMのキーフォブは、サイトが50個または100個のクレデンシャルを発行する必要がある場合にすぐに費用がかさむプレミアム価格であり、調達チームは常に資格のある独立したサプライヤーを探しています。その需要は、当社の製品範囲にぴったりと当てはまります。 主要なすべてのフォーマットに対応する互換キーフォブプログラム.

Paxtonのトークン範囲はいくつかの部品番号にわたります。最も頻繁に注文されるのは標準の黒いキーフォブ(部品番号695-644)と近接カードの同等品ですが、基盤となる認証フォーマットは標準トークンラインナップ全体で一貫しています。部品番号参照で互換性のある在庫を注文することは、フォーマットが実際に内部で何を要求しているかを理解すれば簡単です。

複数のPaxtonサイトを担当する設置業者や施設管理者にとって、互換性のある供給の経済性は明らかです。わずかな単価の節約でも、スタッフの離職、キーフォブの紛失、新規入社者の発行が日常的に発生するプログラム全体で大幅に積み重なります。専門のクレデンシャルメーカーからの独立した供給は、OEM在庫と同じ登録体験をより競争力のある価格で提供し、クレデンシャルの品質と互換性保証に特化したサプライヤーという追加の利点があります。

Why a Password-Protected Transponder Is Not a Plain 125 kHz Proximity Card

Standard 125 kHz read-only credentials — EM4100, HID Prox, Indala — broadcast a fixed ID on request with no authentication layer. Any compatible reader that knows the encoding simply reads and acts on that ID. A password-protected transponder operates differently: it is a bidirectional, password-authenticated LF protocol. Before the tag transmits its identifier, the reader and the tag perform a mutual authentication exchange using a shared secret embedded in the chip's protected memory pages.

The practical consequence is that a compatible crypto fob must be correctly configured — password and memory layout set to match what the Paxton controller expects — before it will be enrolled or recognised. A blank crypto transponder chip that has not been configured will simply not respond correctly to a Net2 or Switch2 reader. This is the source of frequent confusion: buyers familiar with plain prox cards assume any 125 kHz blank will substitute in, only to find the controller silently rejects credentials that haven't been prepared for the format. Our T5577説明ガイド covers the broader landscape of programmable LF blanks, but the password-protected transponder is its own distinct protocol class that T5577 does not cover.

The password-protected architecture also means this credential class sits in a different compliance category to plain prox. Sites using it get a meaningful step up in LF-layer security compared to EM4100 or standard 26-bit Wiegand cards. It is not a high-security smart-card protocol — that tier belongs to AES-encrypted HF formats — but it is substantially more robust than unprotected prox, which matters for the risk profile of the many medium-security commercial sites Paxton serves.

Understanding this distinction is also important for procurement conversations. When a facilities manager asks whether a compatible fob will 'work the same way,' the answer is yes — but only because the compatible fob has been correctly prepared at the protocol level, not simply because it shares the 125 kHz operating frequency with plain prox credentials. The preparation step is what makes our compatible crypto fob a direct functional equivalent to the Paxton OEM token.

トークンの部品番号とその意味

Paxtonは、分かりやすい部品番号の分類法を公開しています。標準のNet2キーフォブは695-644(黒仕上げ、ISO標準キーリングループ)です。カード形式のクレデンシャル(695-651および関連)やNet2リーダー範囲用の近接カードもあります。Switch2トークンは同じクレデンシャルフォーマットを共有し、標準のキーフォブ部品番号が相互に適用されます。プラットフォームの区別はコントローラーハードウェアにあり、トークン自体にはありません。

When procuring compatible stock, the part number gives you the physical form factor you need, but the format specification that matters for compatibility is the password-protected transponder configuration, not the moulded case reference. Our Paxton Net2/Switch2互換キーフォブ 製品リストは、標準の695-644同等品に直接対応しています。同じ寸法、同じループ配置、同じチップクラスで、正しい工場構成にプログラムされています。購入者は、トレーサビリティのために発注書にOEM部品番号を参照できます。当社はその仕様に従って履行します。

お客様のサイトが標準トークンフォーマットを使用しているか、Paxtonのあまり一般的ではない近接カードバリアントのいずれかを使用しているか不明な場合は、当社の アクセスカードフォーマット識別ガイド は、物理的な検査手順と、関連する場合は、使用中のプロトコルを確認するリーダー出力チェックについて説明しています。

Sites that have accumulated a mix of credential generations — perhaps older Switch2 tokens alongside newer Net2 installations — will find that compatible supply simplifies reordering considerably. Rather than tracking OEM stock levels across multiple part-number variants, a single compatible fob specification covers the standard password-protected 125 kHz credential type used across the Paxton estate. The physical form factor of the 695-644 equivalent is the most commonly held, and our standard stock reflects that.

互換性のあるPaxtonトークンの製造

正しく製造された 互換性のあるPaxtonキーフォブ starts with a genuine password-protected 125 kHz blank — not a generic LF blank, and not an EM4100 credential relabelled. The chip's authentication block and configuration pages must be written to the correct state before the fob is packaged. This is a programming step, not a duplication exercise: the output is a blank credential in the right protocol state, ready for your Net2 or Switch2 system to enrol with its own site-specific settings, just as it would enrol a factory-fresh OEM token.

Enrolment happens through the Paxton software in exactly the same way as with OEM stock. The controller assigns a token ID, sets permissions and time profiles, and writes that enrolment to its database. The compatible fob holds no site-specific data before enrolment — it simply presents itself to the reader as a valid password-protected 125 kHz credential in the expected configuration, at which point the Paxton system takes over. This is the standard model for エンタープライズ独自の互換クレデンシャル の標準モデルです。

この段階での品質管理は重要です。正しい構成に書き込まれていないチップは、登録時にサイレントに拒否され、現場で時間を無駄にします。当社の製造プロセスには、すべてのキーフォブバッチに対する読み戻し検証ステップが含まれています。大規模サイト向けに注文する購入者は、完全な納品を受ける前にベンチテスト用のサンプル数量を要求する必要があります。これは、重要なアクセスコントロール消耗品にとって標準的な慣行です。

読み戻し検証ステップは特に言及する価値があります。バッチ内の各キーフォブは、Paxton Net2およびSwitch2の登録に認証ブロックとメモリページが正しい状態であることを確認するために、参照プロファイルに対してチェックされます。これにより、サイレントな非互換性が顧客サイトに到達するリスクが排除されます。展開にサイト規模の展開(たとえば、新しい建物用の100個のキーフォブ)が含まれる場合、完全な発行前に生産ロットの品質を確認することが専門的なアプローチであり、当社はその目的のためのサンプル要求を積極的にサポートしています。

Paxtonトークンとプレーンな125 kHz近接の比較

The table below sets out the key differences between Paxton Net2/Switch2 password-protected tokens and the plain-prox credentials used in basic 125 kHz systems. The distinction is relevant both for sourcing decisions and for understanding what compatible supply actually involves.

現在プレーンなproxを運用しており、Paxtonへの移行を検討しているサイト、またはPaxtonのクレデンシャル階層がセキュリティ要件に適しているかどうかを評価しているサイトは、この比較が役立つでしょう。 互換性のあるアクセスカードと純正アクセスカードのバイヤーズガイド は、互換性のある供給が簡単である場合と、より注意が必要な場合を含め、より広範な調達の問題をカバーしています。

互換性のあるPaxtonキーフォブを大量に注文する

互換性のあるPaxtonトークンは、当社の 125 kHz LF近接範囲 単一ユニット、10個パック、およびサイト規模の数量で提供されます。標準在庫は695-644と同等のキーフォブフォームファクターをカバーしており、カードフォームのPaxton互換クレデンシャルはリクエストに応じて利用可能です。標準在庫のリードタイムは短く、より大規模な特注バッチは適切な通知をもって注文する必要があります。

A useful alternative for multi-site operators or access-control installers managing several Paxton estates is our crypto transponder blank fob — the unprogrammed password-protected 125 kHz token that some system integrators prefer to encode in-house using their own Paxton-connected tooling. For direct issuance without additional programming steps, the pre-configured Paxton Net2/Switch2互換キーフォブ が適切な製品です。Paxtonシステムに加えてPACまたはStanleyの設置も管理している場合、当社の PAC互換トークンフォブ は同じ注文プロセスでそのフォーマットをカバーします。

新しいPaxton設置の入札を行う設置業者、または既存のシステムの管理を引き継ぐ設置業者にとって、最初から信頼できる互換フォブのサプライチェーンを確立することは、単一ベンダーチャネルへの依存を減らし、クレデンシャルのライフサイクル全体にわたる価格安定性を提供します。当社は複数のサイトにわたるシステムを管理するアクセスコントロール設置業者と定期的に協力しており、包括的な注文、段階的な配送、およびリクエストに応じたフォーマット検証をサポートできます。

Security ID Systemsは、互換性のあるアクセスコントロールクレデンシャルの独立した製造業者および供給業者であり、Paxton Access Limitedとは提携、認可、または承認されていません。

Paxton Net2/Switch2 password-protected token vs plain 125 kHz proximity: key differences

属性Paxton Net2/Switch2 (Password-Protected)プレーンな125 kHz近接型 (例: EM4100)
チップ技術Password-protected 125 kHz (LF crypto)EM4100または類似の読み取り専用LF
動作周波数125 kHz125 kHz
認証パスワード認証による双方向交換なし — あらゆる要求に対して固定IDをブロードキャスト
メモリ256ビット、保護されたページでパーティション化64ビット、プログラミング後は読み取り専用
互換性のあるブランクが必要Password-protected 125 kHz blank, correctly configured任意のEM4100互換ブランク
登録方法Paxton Net2/Switch2ソフトウェア経由で登録リーダーに提示; IDを直接読み取り
セキュリティレベルLF暗号 — 中程度; プレーンな近接型よりも強力最小限 — クレデンシャル層の認証なし
互換性のある供給の複雑さ登録前に正しいプロトコル構成が必要簡単 — ブランクがIDを保持

よくある質問

Paxton Net2フォブにはどのチップが搭載されていますか?

Paxton Net2 and Switch2 tokens use a password-protected 125 kHz transponder, a low-frequency crypto credential that operates with password authentication rather than broadcasting a fixed ID like a plain prox card. The chip runs a mutual authentication exchange with the reader before transmitting, which is why a correctly configured password-protected blank is required for compatible supply rather than a generic 125 kHz token.

Paxtonのフォブは互換供給で交換できますか?

A Paxton Net2 or Switch2 fob cannot be handled using ordinary read-write tools in the way a plain prox card can, because the transponder's password-protected memory blocks prevent straightforward read-back of the credential data via standard equipment. Compatible replacement fobs are produced as correctly configured blanks that your Paxton system enrols fresh — the same process as issuing a new OEM fob — rather than as credentials derived from an existing token.

What is the Paxton token protocol?

The Paxton token protocol is a low-frequency (125 kHz) RFID protocol. It differs from plain prox formats by including a password-based authentication layer and protected memory pages, making it a more secure LF credential. It is used by Paxton Access across its Net2 and Switch2 product lines and by a number of other European access-control manufacturers.

Net2とSwitch2のトークンは互換性がありますか?

Yes. Net2 and Switch2 tokens use the same password-protected 125 kHz credential format and the same physical form factor. The difference between the two product lines is in the controller hardware and software — Net2 is a networked, multi-door platform; Switch2 is a standalone single-door system — but both enrol and operate the same token type. A compatible fob supplied for one platform will enrol correctly on the other.

Paxtonフォブを10個パックまたはそれ以上の数量で供給できますか?

はい。互換性のあるPaxton Net2/Switch2フォブは、単体、10個パック、および大規模なサイト規模の数量で入手可能です。標準在庫は、OEM 695-644リファレンスと同等のキーフォブフォームファクターをカバーしています。大量注文または複数サイトプログラムの場合は、完全な展開の前に、バッチサイズ、リードタイム、およびサンプルテストについてご相談ください。

互換性のあるPaxtonフォブはすべてのNet2リーダーバージョンで動作しますか?

Compatible Paxton fobs programmed to the correct password-protected 125 kHz configuration are designed to enrol and operate across the standard Net2 and Switch2 reader range. As with any credential supply, we recommend testing a sample batch at your site before full deployment, particularly on older or non-standard reader installations, to confirm enrolment behaviour before committing to a large order.

Paxton 695-644部品番号とは何ですか?

695-644 is Paxton Access's standard black key fob for the Net2 and Switch2 product lines — the most widely ordered token form factor in the Paxton range. It uses the password-protected 125 kHz protocol and is the reference our compatible fob product maps to. Ordering compatible stock against the 695-644 part number is common practice among installers and facilities managers procuring outside the OEM channel.

見積もりを依頼する

お探しのフォーマットが見つかりませんか?専門家にお問い合わせください。

Send the part number printed on your card or a photo of the reader. We confirm compatibility before you order — and we cover specialist and legacy formats too.